Archive for avril 25th, 2020

Migrate your ESXI VMs to proxmox ZFS

Lately, I migrated my personal lab from ESXI to proxmox hypervisor.
Many reasons are behind this move :
– using vmware esxi free did not allow me proper HA or replication
– each update was painful, and got some CPU no longer supported warnings
– not free open source etc.
– saw proxmox running at other place and was looking good
– the need to learn something new, and to have HA at my home lab as I migrated my workloads from VPS to home (due to OVH suspending an old offer and not allowing to migrate, but rather requiring full re install, in short delays…. tired of not controlling anything, I wanted to move my stack home, and have some redundancy).

Basically, this operation was from the following :
ESXI 6.7 latest update available in 2020 April (aside of the new major 7) to Proxmox PVE 6.1.8

This assume you have an ESXI and proxmox up and running that can reach each other and that you have NO SNAPSHOT on vmware esxi.
I also assume you have a ZFS volume mounted in your proxmox.

On the proxmox node (pve), from the shell, I install SSHFS :

#install SSHFS to mount esxi volume
apt install sshfs

#creating mount point
mkdir /mnt/ssh

#Mount root directory of esxi on /mnt/ssh of pve node
sshfs root@esxi:/ /mnt/ssh

#Convert flat VMDK drive to raw image (reading on esxi via SSHFS and output on your local proxmox)
#The below command must run from a drive where you have enough space to store the full size VMDK (usually /volume-you-created on your proxmox)
qemu-img convert /mnt/ssh/vmfs/volumes/<yourdatastore>/<yourvmname>/<yourvmname>-flat.vmkd -O raw <yourvmname>.raw

#Create the target VM in proxmox with the same specs as ESXI, and making sure you pick ZFS volume as storage.
#identify target disk of the created VM in /dev/zvol/<volumeName>/<diskName>

#Once you know where is you new VM (usually a number associated with the VM) volume is you can dump the raw image to the new virtual disk
dd bs=1M if=<yourVMname>.raw of=/dev/zvol/<volumeName>/<diskName>

If your machine is loaded, the command above may stale your ZFS and overload the server ( load can be way above amount of availalbe threads, due to default ZFS settings no limiting amount of threads).

A workaround found here actually helped getting around the issue using the option oflag=direct
dd bs=1M oflag=direct if=<yourVMname>.raw of=/dev/zvol/<volumeName>/<diskName>

Hope this helps, when migrating big VMDKs over 1TB, I had ZFS crashes due to this, command above allows to import them properly.

#When done, start the new VM and see if it boots. The main issue I had either on CentOs or Debian, was that network interface name changed. So at first boot, VM has no network.
#Not a big issue, edit the interface name in /etc/network/interface (debian) or /etc/sysconfig/network-scripts/ifcfg-ethx  (CentOs)
#The MAC address changed, unless you forced it while creating the VM.

#As soon as your VM is up, delete the .raw image from your drive to free up space.

This is how I migrated 8 VMs, from ESXI to Proxmox without any issues.

Additional notes following this migration (2020 April 27) :

After migrating my last VM, I had a weird error stating I did not have enough space to replicate, as the system could not take any snapshot.

This is due to a default setting in ZFS, in Proxmox, where by default, a space reservation on the volume is made for snapshots etc, with the same size of the actual disk size.

While fine for most of the case, when you have a VM with 1.66TB drive, it starts to be an issue.

There is more explanation here about ZFS refreservation : http://www.mceith.com/blog/?p=153

Basically, in my case, the refreservation was as big at 1.66TB, not allowing snapshots to be taken, and therefore, not allowing VM replication.

You can see the information for a volume with the following command :

zfs get refquota,reservation,refreservation yourvolume/your-vm-disk

So basically, for my VM that had a refreservation default value of 1.66TB, I actually did set it to 500G, since my drive only had 578G of unassigned space.

This allowed the replication process to go on :

refreservation in proxmox

Hopefully this will help some, facing the disk full issue where disk is not actually full but reserved.

Loading

samedi, avril 25th, 2020 proxmox, Technologie 2 Comments
Not f'd — you won't find me on Facebook
avril 2020
L M M J V S D
 12345
6789101112
13141516171819
20212223242526
27282930  
 

 
Suivez moi sur twitter - follow me on twitter
 
Follow on LinkedIn
[FSF Associate Member]
 
Free Software, Free Society
VIRTUALISATION :
Compacter une image virtualbox VDI
Bon petit tutoriel esxi
Marche d'appliances vmware
Installer ESXi sur un disque IDE
Installer ESXi 3.5 sur un disque USB
Installer proxmox avec DRBD et migration / réplication à chaud
Installer OSSEC avec VMware
Information sur le VDI
SECURITE - FIREWALL :
Ouvrir des ports dynamiquement iptables - knockd
Autre tres bon tuto knockd
Docs Arp poisoning - Anglais
Metasploit test de pénétration
Zone H - sites piratés en temps réel
Blog invisible things
Tips protection sécurité wordpress
Pfsense - distribution firewall opensource - adsl internet failover
Iproute 2 mini how to - linux advanced routing
ClearOS - la passerelle sécuritaire lan - wan
HAUTE DISPONIBILITE :
CDN - Accélération de la distribution de données
drbd iscsi ocfs2 dm multipath tutoriel
Load balancing LVS
Load balancing opensource list
HA-Proxy :
HAproxy - http load balancer
Simple tutoriel HAproxy
HAproxy - debian tutoriel
Centos - Ip failover
Configuratoin DM-Multipath Redhat
VMware Doubletake - continuité
Quelques liens sur la réplication MySQL : Manuel MySQL, chapitre sur la réplication
Manuel MySQL, Tutoriel clair sur la mise en place
Autre tuto sur la mise en place de la réplication MySQL
Références pour optimisation du serveur MySQL
Utilisation de EXPLAIN mysql pour optimiser vos bases
optimiser vos bases - requetes et index
STOCKAGE RESEAU :
Un outil de clonage disque en reseau
Internet NAS 250Go 250 accès VPN
Server ISCSI avec Ubuntu tuto
ISCSI centos redhat tutoriel
Gérer et étendre un LVM
Créer sa piratebox ! trop cool
Deaddrops, les clés USB dans les murs, aussi cool !
OPTIMISATION WORDPRESS :
Télécharger Xenu
Comment utiliser Xenu
optimisation hébergement wordpress
Super howto wordpress (En)
Test de charge serveur web - Load impact
VPN - ROUTEUR - LAN:
Zeroshell - le mini-routeur wifi tout en un
Retroshare, votre réseau d'échange crypté!
Openvpn sur centos redhat
Intégrer Linux dans active directory
Routage inter-vlan avec Linux
Routage avec OSPF
Network Weathermap
TENDANCES - WEB:
Boutons twitter
Analyser les tendances des recherches Google
Protocole sitemap - robots.txt
Creer des animations CSS3
Code php pour interagir avec twitter
E reputation
Jquery
TRUCS ET ASTUCES GNU/LINUX :
Tuxmachines.org - Actus et tips linux
Configurer GRUB2 et grub2 ici
Panoet - en anglais - tips & tricks
Readylines tips and trick pertinents
Squid Clamav - proxy antivirus
Apprendre Unix en 10 minutes
13 tips sur les expressions régulières
IE Sous linux IES
LDAP 2.4 Quickstart guide
Tutoriel LDAP
Installation annuaire LDAP
Serveur Mail Postfix - Dovecot - LDAP - MDS
Créer un linux personnalisé en ligne - custom linux
Super site sur linux - en
Capistrano - déploiement automatisé
MONITORING :
Nagios tutoriel et doc
Nagios plugin NRPE tuto
Nagios plugin NRPE autre tuto
Nagios plugin NRPE officiel
Zabbix - fonctionnalités
Zabbix - installation
Guide MRTGsys - grapher la charge locale
MRTGsys - ajouter des graphs
MRTGsys - interpréter les données
Shinken - Monitoring
Thruk Monitoring webinterface
Shinken - Tutoriel
Shinken - Référence chez Nicolargo
AUTRES LIENS :
RemixJobs IT jobs
USB Multiboot
Reset mot de passe windows
Java python et autres tips, intéressant !
Forum inforeseau
Open Clipart
Excellent comic en ligne
Inforeseau.fr